High-Performance Transducers for Industrial Applications
Compact and reliable, our current and voltage transducers are applied for the measurement of sinusoidal alternating currents (nominal input current from 0.05 to 20 A) and alternating voltages (nominal input voltages from 200 to 690 V).
For higher currents or voltages, external transformers have to be connected before proper scaling.
All devices are designed with a secure snap-on mechanism for efficient DIN-rail mounting inside industrial control panels.
Please select the transducer models that best fit your installation needs.
The transducer CIP-CA / CIP-CV convert a sinusoidal AC current or AC voltage into load independent DC current or a load independent DC voltage proportional to the measured value.
CIP-CA-CV
Type: Voltage / Current
Class: 0.2
Dimensions: 65.5 x 22.5 x 100.5 mm
The transducers CIP-V / CIP-I are used to measure and convert AC voltaje or current input into a load independent DC current or voltage output signal. Output signal generated is proportional to the root mean square value of the input current or voltage
CIP-V-I
Type: Voltage / Current DC
Class: 0.2
Dimensions: 65.5 x 43.75 x 106.5 mm
The CIP-Hz transducer is used for frequency measurement. The output signal is proportional to measured frequency and is either load independent DC current or DC voltage.
CIP-Hz
Type: Frequency
Class: 0.2
Dimensions: 65.5 x 43.75 x 106.5 mm
The CIP-P is used to measure and convert active or reactive power in to a single-phase or three-phase AC system with balanced or unbalanced load into a proportional load independent DC current or voltage output signal.
CIP-P
Type: Active or Reactive power
Class: 0.2
Load: Balance or Unbalanced
Dimensions: 65.5 x 78.5 x 106.5 mm
DIN rail, fully programmable, high accuracy, the multi-transducer, can be used with 50, 60 or 16⅔ Hz rated frequencies with a wide range of AC and DC auxiliary supply. This transducer can measure active and reactive powers, power factors, and all other electrical quantities including voltage and current for any 3-phase system. The CPQT can be easily programmed through its USB micro standard port and ConfigLQT free software.
CPQT2
Output: 2 analog output
Range: +/- 20mA, +/- 5mA or +/-10V
Class: 0.2
Dimensions: 70 x 132 x 101 mm – DIN rail
DIN rail, fully programmable, high accuracy, the multi-transducer, can be used with 50, 60 or 16⅔ Hz rated frequencies with a wide range of AC and DC auxiliary supply. This transducer can measure active and reactive powers, power factors, and all other electrical quantities including voltage and current for any 3-phase system. The CPQT can be easily programmed through its USB micro standard port and ConfigLQT free software.
CPQT4
Output: 4 analog output
Range: +/- 20mA, +/- 5mA or +/-10V
Class: 0.2
Dimensions: 70 x 132 x 101 mm – DIN rail
